Image 1 of 2
Image 2 of 2
A6 - Sharpe 28mm British Napoleonic Knapsack Transfers 95th Rifles Transfer Sheet
Please read before purchase. These are printed using a Laser printed and may take quite a while to be ready due to how time consuming the process is and other orders before yours. I do not do rush orders and these are not the same as the sheet you get in a GW box, decal printing is not an exact process and there may be a few differences from the mock design such as the colour being a bit brighter, white being slightly transparent and also sometimes a white offset to the icons, I can't control this and they are minor issues so please bear in mind before you purchase
I will not accept any cancellations for 'Won't arrive on time or changed mind on these items' If you have the put the wrong address in as well please just let me know where you'd like it sending instead of putting in a cancellation as these affect my seller ratings.
I also do not accept returns on these for any reason. Before you leave negative or neutral feedback for whatever reason please message me first as I will be able to help you with whatever the problem might be.
U.S.A Customers Please Read this - If you are worried about the Import tariff on this item the tariffs do not apply to Letters, only parcels and since these are small enough to be classed as a letter you should not be charged a tariff, there is a change it might happen if the delivery address is a PO box or Post Office so please choose your home address if possible.
These were printed on clear filmed decal paper and you need to cut around the icon as close as possible to get them onto the shoulders otherwise the film will be too big I also recommend using the Microsol and Microset method
The icons are very small and the writing may not print fully at the smallest scale but will give the general idea or just be hard to read, but this will be easier than freehanding of course.
I used Perry miniatures to measure for the sizing of these, please measure the gap on your models Knapsack to see if these will fit before purchase.
If you would like any other decals for any other regiments or these making to a different scale please message me and I might be able to help you
If you have any questions please ask
The icons and approximate sizes included are
2mm
1.5mm
Please note that not all detail may be printed on smaller icons such as holes on eyes or anything similar due to how toner ink works, they will still of course give the effect of the icon from afar and on a shoulder pad anyway.
Recommended Directions for use
1: Gloss Varnish the model or the area you would like to apply the transfer ( I use either Army Painter Gloss Varnish via brush or Hycote Clear Lacquer for spray)
2: Wait for the Varnish to dry
3: Cut around the decal as close as you can giving your self an edge around the icon (Do not cut the icon) these are not pre cut like regular transfers.
4: Apply a thincoat of Microset to the area of the model you will apply the decal
5: Soak the transfer in some lukewarm water for a few seconds
6: Slide the icon off the paper and onto the model
Please read before purchase. These are printed using a Laser printed and may take quite a while to be ready due to how time consuming the process is and other orders before yours. I do not do rush orders and these are not the same as the sheet you get in a GW box, decal printing is not an exact process and there may be a few differences from the mock design such as the colour being a bit brighter, white being slightly transparent and also sometimes a white offset to the icons, I can't control this and they are minor issues so please bear in mind before you purchase
I will not accept any cancellations for 'Won't arrive on time or changed mind on these items' If you have the put the wrong address in as well please just let me know where you'd like it sending instead of putting in a cancellation as these affect my seller ratings.
I also do not accept returns on these for any reason. Before you leave negative or neutral feedback for whatever reason please message me first as I will be able to help you with whatever the problem might be.
U.S.A Customers Please Read this - If you are worried about the Import tariff on this item the tariffs do not apply to Letters, only parcels and since these are small enough to be classed as a letter you should not be charged a tariff, there is a change it might happen if the delivery address is a PO box or Post Office so please choose your home address if possible.
These were printed on clear filmed decal paper and you need to cut around the icon as close as possible to get them onto the shoulders otherwise the film will be too big I also recommend using the Microsol and Microset method
The icons are very small and the writing may not print fully at the smallest scale but will give the general idea or just be hard to read, but this will be easier than freehanding of course.
I used Perry miniatures to measure for the sizing of these, please measure the gap on your models Knapsack to see if these will fit before purchase.
If you would like any other decals for any other regiments or these making to a different scale please message me and I might be able to help you
If you have any questions please ask
The icons and approximate sizes included are
2mm
1.5mm
Please note that not all detail may be printed on smaller icons such as holes on eyes or anything similar due to how toner ink works, they will still of course give the effect of the icon from afar and on a shoulder pad anyway.
Recommended Directions for use
1: Gloss Varnish the model or the area you would like to apply the transfer ( I use either Army Painter Gloss Varnish via brush or Hycote Clear Lacquer for spray)
2: Wait for the Varnish to dry
3: Cut around the decal as close as you can giving your self an edge around the icon (Do not cut the icon) these are not pre cut like regular transfers.
4: Apply a thincoat of Microset to the area of the model you will apply the decal
5: Soak the transfer in some lukewarm water for a few seconds
6: Slide the icon off the paper and onto the model