A8 - WW2 Bolt Action British Black Rats 4th Armoured Decals 28mm Scale 1/56

Please read before purchase. These are printed using a Laser printer and may take quite a while to be ready due to how time consuming the process is and other orders before yours. 

I do not do rush orders and these are not the same quality as the sheet you get in a standard miniature company box, decal printing is not an exact process and there may be a few differences from the mock design such as the colour being different, white being slightly transparent and also sometimes a printed blur, colour shift or offset to the icons, I can't control this and they are minor issues so please bear in mind BEFORE you purchase. 

These are also not pre-cut icons like in a GW transfer box, you have to cut around the icon yourself on the clear film part so there is an edge to work with.

I will not accept any cancellations for 'Won't arrive on time or changed mind on these items' If you have the put the wrong address in as well please just let me know where you'd like it sending instead of putting in a cancellation as these affect my seller ratings.

If you have any questions please ask

I also do not accept returns on these for any reason. Before you leave negative or neutral feedback for whatever reason please message me first as I will be able to help you with whatever the problem might be.

U.S.A Customers Please Read this - If you are worried about the Import tariff on this item the tariffs do not apply to Letters, only parcels and since these are small enough to be classed as a letter you should not be charged a tariff, there is a change it might happen if the delivery address is a PO box or Post Office so please choose your home address if possible. I don't know if this applied to the latest tax as from February 21st 2026 so please be aware of that, it is not my responsibility to pay the tax, it is yours as the buyer. I do not accept returns or cancellations for these reasons.

These were printed on clear filmed decal paper and you need to cut around the icon as close as possible to get them onto the shoulders otherwise the film will be too big I also recommend using the Microsol and Microset method.

If you have any questions please ask

The icons and approximate sizes included are

3mm

Please note that not all detail may be printed on smaller icons such as holes on eyes or anything similar due to how toner ink works, they will still of course give the effect of the icon from afar on a miniature anyway, also colours may not match the mock up exactly

Recommended Directions for use

1: Gloss Varnish the model or the area you would like to apply the transfer ( I use either Army Painter Gloss Varnish via brush or Hycote Clear Lacquer for spray)

2: Wait for the Varnish to dry

3: Cut around the decal as close as you can giving your self an edge around the icon (Do not cut the icon) these are not pre cut like regular transfers.

4: Apply a thincoat of Microset to the area of the model you will apply the decal

5: Soak the transfer in some lukewarm water for a few seconds

6: Slide the icon off the paper and onto the model